te.com /products/minict the amp mini ct connectors are miniature wire-to-board and wire-to-wire connectors. like the standard amp ct connector series, these connectors are tailored for improved harness productivity and feature a compact design with contacts on 1.5 mm pitch. wire-side connectors can be used to produce a variety of harness styles by fully automatic high-speed assembling machines. features and benefits 2 kinds of termination method: idc, crimp ? discrete wire interconnect ? circuits range from 2-20 single row, ? 22-40 dual row awg 24~28 ? both t/h and smt mounting styles ? are available kinks for self-retention on boards ? many components are recognized under ? the component program of underwriters laboratories inc., fle no. e28476 certifed by canadian standards ? association, file no. lr 7189 product applications business equipment ? industrial machines ? pc, printer and fax ? c-tv ? audio ? air conditioner ? routed power & signals ? led lighting controls ? indoor & outdoor lighting ? led illumination ? quick reference guide 1.5 mm amp mini ct connector series
te.com/products/minict 1.5 mm amp mini ct connector series te connectivity mt time savings ? preloaded idc contacts ? automation ? mates with all headers ? crimp poke cost effective ? flexibility (awg) ? manual labor ? mates with all headers ? mass termination (mt) vs. crimp poke how to select an amp mini ct connector part number the charts on this page highlight the relationship between the number of contacts (positions) to the part number. please see the sample chart below that was designed to help you select the correct part number for your needs. for single digit position to dash numbers, attach the digit to the end base number. for double digit position to dash numbers, attach the frst digit to the front of the part number, add a dash and the base part number, then follow the base part number with a dash and the second digit. example base part number your criteria example position to dash selection end part number based on criteria position 8 9 10 11 12 353293 you require and 8 position mt housing dash number -8 -9 -10 -11 -12 353293-8 353293 you require and 12 position mt housing dash number -8 -9 -10 -11 -12 1-353293-2 1pzsawrs1sba 313b/1:3131bae73/:71/b7 description pn photo position to dash 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 mt receptacle housing - awg : 26-28 353293 a -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 mating part numbers: 292206; 292207; 292227; 292228; 292239; 292231; 292215; 292208; 292216 specifcations: c, x 17;bg36ca75 description pn photo position to dash 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 crimp receptacle housing - white 353908 c -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 mating part numbers: 292206; 292207; 292227; 292228; 292239; 292231; 292215; 292208; 292216 specifcations: b 1b/1ba description pn photo specifcations reel-awg: 24-28 353907-1 b b,y loose piece - awg: 24-28 353918-1 b b,y 1pzsawrs1sba(bzwbwa /:71/b7b:75 amp mini ct pn description tooling pn tooling description application specifcation instruction sheet 393293 mt housing 937317-1 pistol tool 114-5223 411-5826 353907-1 crimp contact - strip 1426169-1 leadmaker applicator 114-5245 411-78049 1426169-2 bench application 114-5245 411-78049 179518-1 crimp contact - loose 1729069-1 hand tool 114-5245 411-78106 * applicators listed are used in the amp-o-lectric model g, amp 3k/40 and amp 5k/40 terminators. call the tooling assistance center at 800-722-1111 for applicator numbers for automatic cut, strip and terminate leadmakers. ** power tooling options are also available. call tooling sales at 888-777-5917 (717-810-2080) for more information mt amp mini ct housing : 353293 unstripped wires inserted into mt housing. crimp amp mini ct contact : 353907 crimp amp mini ct housing : 353908 contact crimped onto a stripped wire to be inserted into a crimp housing.
te.com/products/minict 1.5 mm amp mini ct connector series te connectivity photo ey 353293 a 292206 d 292228 292229 g m 292215 j 353907 b 292207 e 292230 292262 h n 353294 k 353908 c 292227 f 292231 292208 2106091 i l o dual row assemblies solder pad locating boss 1 2 3 dual row assemblies two single row receptacle housings, either mt or crimp, that use a holder to mate with a dual row header. solder pad designed to secure the smt headers onto the pcb locating boss a mechanical feature that helps orientate the headers onto the pcb.
te.com/products/minict 1.5 mm amp mini ct connector series te connectivity se pst eae assemes amt description pn photo position to dash 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 t/h type horizontal-mount type, w/o boss 292206 d -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 t/h type vertical-mount type, w/ boss 292207 e -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 smt type horizontal-mount type, w boss 292227 f -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 smt type horizontal-mount type, w/o boss 292228 g -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 smt type vertical-mount type, w boss 292230 h -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 smt type vertical-mount type, w/o boss 292231 i -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 mating part numbers: (mt) 353293 or (crimp) 353908 w/ 353907-1 or 353918-1 specifcations: a, x a75:3eab63/23/aa3;0:73a(/3:;cb description pn photo position to dash 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 single row panel-mount 292215 j -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 mating part numbers: (mt) 353293 or (crimp) 353908 w/ 353907-1 or 353918-1 specifcations: a, x 2c/:e63/23a description pn photo position to dash 22 24 26 28 30 32 34 36 38 40 receptacle housing connector mounting holder 353294 k -22 -24 -26 -28 -30 -32 -34 -36 -38 -40 note: two receptacle housings are applied per holder and one holder per dual row header mating part numbers: 2 x (mt) 353293 or 2 x (crimp) 353908 w/ 353907-1 or 353918-1 specifcations: c, x 2c/:eab63/23/aa3;0:73a(0/2;cb description pn photo position to dash 22 24 26 28 30 32 34 36 38 40 dual row t/h type/ vertical-mount 292208 l -22 -24 -26 -28 -30 -32 -34 -36 -38 -40 dual row smt type/ vertical mount type w/boss 292229 m -24 -26 -28 -30 -32 -34 -36 -38 -40 dual row t/h type/ horizontal mount w/ board lock 292262 n -22 -24 -26 -28 -30 -32 -34 -36 -38 -40 mating part numbers : 353294 w/ 2 x mt or 2 x crimp single row housings specifcations: a, c, x 2c/:eab63/23/aa3;0:73a(/3:;cb description pn position to dash 22 24 26 28 30 32 34 36 38 40 dual row panel-mount 292216 -22 -24 -26 -28 -30 -32 -34 -36 -38 -40 mating part numbers : 353294 w/ 2 x mt or 2 x crimp single row housings specifcations: c, x 7d3b32b6c0/2 description pn photo position to dash 2 3 4 5 6 smt type thru board 2106091 o -1 -2 -3 -4 -5 mating part numbers : mt 353293 or crimp 353908 w/ 333907-1 or 333918-1 specifcations: d, z ;771b1/0:3/aa3;0:g description pn position to dash 2 3 4 5 6 cable assembly 2058943 -1 -2 -3 -4 -5 4 panelmount trans mits signal through a notch in a panel or a pcb and requires two housings to complete a circui t. 5 sm inerted ru board positioned thru a cutout or not ch in a pcb and requires only one housing to complete a circuit. the innovative design eliminates wire dress ma nagement issues. 4 5
te.com/products/minict 1.5 mm amp mini ct connector series te connectivity product/application specifcation ratings product specs voltage operating current (amps) temperature 24 awg 26 awg 28 awg 30 awg a 108-60018 50 v (ac/dc) 2 1 -30 to 105c b 108-60025 50 v (ac/dc) 3 2.5 1.5 -30 to 105c c 108-5525 50 v ac 2 2 -65 to 105c d 108-2376 50 v (ac/dc) 3 2.5 1.5 -30 to 105c application specs x 114-5223 y 114-5246 z 114-13245 amp mini ct mount styles 292215 panel mount header 292206 t/h r/a header 2106091 smt inverted thru-board 292262 dual row t/h r/a header 292207 t/h vertical header 353293 idc receptacle housing 292208 dual row t/h vertical header 353908 crimp receptacle housing 292227 smt r/a header 292230 smt vertical header design kits pn description 2110828-1 amp mini ct t/h deluze vertical and right angle kit 2110828-2 amp mini ct t/h vertical header kit 2110828-3 amp mini ct t/h right angle header kit 2110828-4 amp mini ct smt deluxe vertical and right angle kit 2110828-5 amp mini ct smtvertical header 2110828-6 amp mini ct smt right angle kit 2110828-7 amp mini ct deluxe t/h and smt vertical and right angle kit 2110828-8 amp mini ct deluxe t/h vertical and right angle kit 2110829-8 amp mini ct deluxe smt vertical and right angle kit *design kits are designed and assembled by waldom and are available for purchase through your local distribution channel. amp mini ct design kits*
for more information te technical support center usa: +1 (800) 522-6752 canada: +1 (905) 475-6222 mexico +52 (0) 55-1106-0800 latin/s. america: +54 (0) 11-4733-2200 germany: +49 (0) 6251-133-1999 uk: +44 (0) 800-267666 france: +33 (0) 1-3420-8686 netherlands: +31 (0) 73-6246-999 china: +86 (0) 400-820-6015 part numbers in this brochure are rohs compliant*, unless marked otherwise. *as defned www.te.com/leadfree te.com ? 2012 tyco electronics corporation, a te connectivity ltd. company. all rights reserved. 6-1773454-5 cis lug pdf 1/2012 amp, amp-o-letric, amp 3/k-40, amp 5/k-40, decam, te connectivity and the te connectivity (logo) are trademarks. other logos, product and company names mentioned herein may be trademarks of their respective owners. while te has made every reasonable effort to ensure the accuracy of the information in this brochure, te does not guarantee that it is error-free, nor does te make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. te reserves the right to make any adjustments to the information contained herein at any time without notice. te expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or ftness for a particular purpose. the dimensions in this brochure are for reference purposes only and are subject to change without notice. specifcations are subject to change without notice. consult te for the latest dimensions and design specifcations. what wire gauge will you be using? there is more fexibility with awg when using crimp (24~28 awg) vs. mt (26~28 awg). are the connectors available for idc? yes, we offer an mt version that is preloaded with idc contacts. is your process automated? mt housings are suitable for automated processes. what current, voltage and operating temperature is required? please see product specifcation information on the charts on page 3 of this document. which is a more standard header, with or without a locating boss? the most standard headers tend to have a locating boss as it makes it easier for the customer to align the connector onto their board. frequently asked questions what special retention mechanisms are available to provide stability? the te t/h headers have a staggered tine design to provide stability. what are my tooling options? te offers comprehensive tooling options including manual pistol- grips, manual mini-press, pneumatic mini-press, semi-auto decam and an automatic decam tool. for more information, please visit www.tooling.te.com. what if my application is constrained for space with the 1.5 mm mini ct? te continues to develop and design interconnects that meet the needs of miniaturized applications. if your application is contrained for space, browse our hpi products at www.te.com/products/hpi does te offer pre-made cable assemblies? yes, we do offer single ended mini ct pigtails in various lengths often used in lighting applications. please reference part number 2058943.
|
